7 Myths About Kitchen Faucets

The supply of kitchen faucets is huge, and within that multitude, you need to find the one that is yours. It will certainly require some research. Technology has evolved a lot during the recent decades, and experts know that some ideas that may once have been true are now outdated. Here you have a collection of seven most widespread myths, and I hope that getting these things right will assist you in your research.

1. A great kitchen faucet is expensive.

In fact, you will be surprised to find how low the price is for which you can get a beautiful kitchen faucet with a lot of helpful features. The word of wisdom says, “He pays a lot who buys cheap”, and to a certain degree that still applies. If you consider purchasing a faucet below $ 80, you might want to find an answer to a question, what makes it that cheap. faucet factory

It can be cheap because it is very basic but still good-looking and reliable. In this case, there is no problem. But beware of too low-priced faucets that offer you a ton of advanced features like pull-out spray wand, fingertip operation of the handle or even touch sensitivity. If your faith is strong enough, such can serve you well for some time, but I fear to make a guess how long or short it can be.

However, within the price range between $120 and $200, there are a lot of faucet models from well-known brands that offer leak proof operation for a lifetime, a set of handy features and eye-catching design.

2. You need a plumber to install a kitchen faucet.

If you have never held a wrench in your hand, you probably do need a plumber to help you with the installation. But if you know how to connect an end of a pipe to the supply, you can do all the things on your own. Every faucet that is worth your attention will come with detailed instructions. But the process is highly intuitive, too. Basically, the lower part of the faucet comes through the installation hole on your sink or counter-top, hot and cold water pipes connected and the faucet fastened with nuts from beneath.

For pull-down models, the hose needs to be guided through the faucet body and spout, for touch sensitive models, there will be a battery pack that needs to be connected to the contacts.

The biggest challenge you can face in the installation process is removing the old faucet.

3. Pull-out wands will not sit snugly enough.

The faucets with detachable spray wands have become extremely popular during the last decades. But there is always some doubt whether the pull-out wand will have a snug enough fit into its dock. If the wand does not sit very well, the faucet loses a lot. It can be beautifully designed, but if the spray head does not sit where it should, the whole faucet will look cheap and inferior. That is why the leading manufacturers of kitchen faucets have done their best to secure the wand firmly in its place.

Some use strong magnets that do a good job to hold the wand in the dock. Others use a smart combination of weights, extremely precise docks and flexible hoses. Whatever the method used in the faucet to keep the spray wand in its place, it might be wise to consult the users’ feedback to see if there are problems with loose fit